The Zenbooth Solo is our most popular model, used as an office phone booth, privacy pod, recording studio, or whatever quiet space you need.
Fits Any Space The Zenbooth Solo has a minimal and natural aesthetic that compliments your space’s existing furniture and fits seamlessly into any office setting.
Exterior Size → 84.5” H x 45.5” W x 41” D Interior Size → 83” H x 36” W x 33.25” D Weight → 560 lbs
Quiet Speaks Volumes Our design and engineering teams have optimized the acoustic performance of the booths to dampen noise so that conversations inside of the booths cannot be heard outside and vice versa.
Stationary or Adjustable Desk
The Zenbooth Solo comes standard with our stationary seated desk or an optional upgrade to the industry's only electric height-adjustable desk that allows you to easily change positions for improved ergonomics.
The fixed desk height is approximately 40” off the floor, while the range of the adjustable desk is 29" to 55" off the floor to allow for either seated or standing work.
Both the adjustable and stationary desk are the same size of 30" long, with a width of 10.2" nearest the door and 16.75" wide nearest the back wall.
Where are Zenbooths made?
We're proud to say that Zenbooths are USA-designed, manufactured, and handcrafted with care by our expert staff in the California Bay Area.
Zenbooth 650 University Ave #10 Berkeley, CA 94710
How soundproof are Zenbooths?
Zenbooths dampen sounds inside and out by about 30 decibels. That's a lot. 🙉
Zenbooths (and other privacy pod brands) are not 100% soundproof for safety and emergency concerns (you still need to be able to hear a fire alarm if you're in a booth).
However, our design and engineering teams have optimized the acoustic performance of the booths to dampen noise so that conversations inside of the booths cannot be heard outside and vice versa.
Additionally, we use special hinges to make sure our doors close on their own and magnets in the door frame to ensure that the doors stay closed with a tight seal to maximize the sound dampening effect of our booths.
Hear It for Yourself Step into a quiet space right when you walk inside. 😌
What type of electrical requirements are needed to power a Zenbooth?
All our booths are plug-and-play, so all you need is a standard outlet 🔌
All Zenbooths only need a standard 110v three-prong power outlet to be plugged into after they’ve been assembled. When the booth is unoccupied, it does not draw any electricity. Once the occupancy sensor is triggered, the booth draws approximately .1 amps (less than a 60W lightbulb) to power the ventilation system. The electricity draw increases as devices are plugged into the booth’s outlets. The length of the power cord is 10 feet, please include a 4-inch space between the booth and the wall when designing your space to allow for proper cord clearance.
Does Zenbooth sell furniture with the booths?
Unfortunately no, but we have some recommendations 🪑
Zenbooth does not sell furniture for our booths, however here are some recommendations:
For the Zenbooth Solo and Zenbooth Duo, we typically recommend bar stool height chairs to accompany the built-in desk.
For the Zenbooth Quad, you can typically fit a small conference table and 4 standard office chairs.
Once I place my order, what happens?
We get to work crafting your Zenbooth ✨
Every Zenbooth is handcrafted and made to order as part of our commitment to quality and environmental responsibility. Once you’ve placed your order, your booths will enter our manufacturing queue based on your chosen manufacturing speed.
Information We'll Request From You Post-Purchase
100% Payment Deposit
Zenbooth requires 100% deposit upon order placement.Your selected manufacturing lead time begins at receipt of payment. The fastest way to remit is by wire transfer or credit card. You may also send overnight checks. If you expect payment to arrive more than 3 days after you place your order, please let us know email@example.com. Unpaid orders may be subject to delay or cancellation.
Your Delivery Details
The Support Team will send you a survey via email to make sure we have all the details about your shipment and delivery requirements. Please make sure you complete this survey and include any special details so we can deliver your booth without any hiccups. We'll provide you with updates as the shipment date approaches to ensure you’re fully aware of your delivery details.
Assembly Service Scheduling
If you've purchased Assembly Services, our service provider will give you a call after delivery to schedule your booth assembly. If your business is located in the Bay Area, shipping, delivery, and assembly is all same-day service and will be scheduled together unless otherwise requested.
If you have questions about the status of your order, shipping, or delivery, feel free to reach out directly toZenbooth Supportand they’ll be able to get you taken care of right away. 😊
How do Zenbooths ship?
We designed our own shipping pallet to keep your booths safe and secure from factory to destination 📦
All booth models ship on custom A-frame pallets directly from our factory in Berkeley, California. Packaged pallets are 48” x 48” x 90” and one pallet can fit two Zenbooth Solos, one Zenbooth Duo, or half a Zenbooth Quad.
Standard delivery includes inside delivery where our delivery partners will take the components to the install location and dismantle and dispose of the shipping pallet and desbris so you never have to worry about getting it off the frame.
Are Zenbooths easy to clean?
Yep, super easy to clean! No special supplies needed. 🧼
We designed our Zenbooths with everyday use in mind, and made the booths easy to clean with just a cloth, soap, and water!
Zenbooths are an important piece of the office and might be one of your workplace’s most used areas. As with the other areas of your office, it is important to clean your booths so that you can still make full use of them. Therefore, we’d like to provide you with some tips for cleaning your Zenbooths.
All surfaces of the booth can be cleaned with a lightly damp cloth and soapy water. Avoid letting any water drip onto the floor of the booth, and use another cloth to blot dry as necessary.
Prioritize and schedule cleaning based on the frequency of use, like you would with any other surface in the office.
When wiping down surfaces, wipe down using the “one-way” method; using circular or back-and-forth motions can just redirect germs & bacteria, as opposed to removing it from a surface.
The booths will typically circulate fresh cycles of air for about 10 minutes after use. If the cleaning product you are using produces fumes, prop the door open for 60 minutes to ensure that it has a chance to dissipate after cleaning.
For more specific cleaning instructions for each surface, see below.
The hard surfaces of Zenbooths that are frequently touched and used are the:
desk surface and adjustable desk controller
These surfaces should be cleaned frequently with standard household/office cleaning products for hard surfaces (seethe CDC’s recommendations). The other hard surfaces of your booth are typically touched less frequently but can also be cleaned using these products.
The current fabric is PET plastic which can be cleaned with bleach if a customer wants to deep clean their booth. Since the panels are nailed to the booth walls and thus can’t be removed for cleaning, the use of water should be limited so as to not get water in the electronics of the booth (i.e. don’t spray it down with a hose).
Zenbooths shipped in 2020 have a soft acoustic felt that is made of polyester fibers that are typically touched less frequently than the surfaces above. They can be cleaned with a damp cloth with soap and water (ensure that water does not drop onto the floor of the booth) or by using a cleaning product suitable for fabric or upholstery like a mild detergent. DO NOT use bleach or alcohol-based products (including Clorox wipes) as these may discolor the panels.
Yep, 3-year Warranty! We want every Zenbooth to live long and prosper 🖖 Every Zenbooth comes with a three-year warranty.
This is a limited warranty against defects in materials and workmanship for a period of three years from the ship date. Zenbooth reserves the right to repair or replace defective merchandise at its sole discretion. This limited warranty does not extend to other materials supplied by the purchaser or damage caused by shipping, accident, abuse, misuse, cleaning, or normal wear and tear. All other warranties express or implied are excluded.
If you have any questions or concerns about your booths or would like recommendations for maintenance, please email firstname.lastname@example.org.
Shipping and Returns
Our refund and returns policy lasts 30 days. If 30 days have passed since your purchase, we can’t offer you a full refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. To complete your return, we require a receipt or proof of purchase.
There are certain situations where only partial refunds are granted: Any item not in its original condition, is damaged or missing parts for reasons not due to our error, and any item that is returned more than 30 days after delivery.
Cancellation & Refund
Cancel your order any time before it ships completely free of charge (exceptions apply such as custom orders, see below).
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days
If you have questions, please send an email to email@example.com or call us at (678) 403-6021
Cancellations of Custom Orders
In the event, you have made a custom or made-to-order products cannot be canceled or refunded as these products are put into production specifically for your order.
These units are custom-made to your specification or created once you order. Once you place your order they start building your unit. Your warranty will guarantee you a fully functional and operational product. If it is not clear whether your order is custom or made to order, please message or call us.
All sales are final for Custom made and Made-to-order products.
If you need to exchange your product, you may do so. You, as the customer, are responsible for any shipping costs throughout any returns and exchange processes.
Not all orders are available for return once they have shipped. We order our products directly from the manufacturer. Therefore, if the manufacturer will not permit us to return a product, we cannot offer you a return. This often varies on a case-by-case basis; please reach out to us if you would like specific information on your brand and/or product.
Due to drastically increasing LTL/freight shipping costs, any outright returns will incur 25% cancellation fee + return shipping costs. If you are replacing the product with something else, we may be able to help you cover some of the costs depending on the product.
We promise to do our best to get your order to you as soon as possible. We provide estimated shipping times on the product pages based upon what our suppliers and freight companies tell us, and those estimated shipping times may change or vary without notice (Due to supply chain issues, the steel mills behind on making metal, the manufacturers delayed because of the mills, the overwhelmingly demand on shipping, factory/warehouse and dock workers and so on).
Order delays have proven to be unavoidable and outside of Home Power Direct's control. While this might be frustrating, we ask you to please be patient and understanding with us in these tough times.
Warranties vary depending upon the manufacturer - see individual product pages for details. Warranty damages occur over time and from use. If an item was damaged upon arrival, and not reported within 30 days, that is not a warranty claim.
We have purposefully made our policies as fair as possible, and we believe they are the top in the industry. We are on your team. We are immediately responsive and will do all that we can to help you out and provide the best resolution.
If you have not received a product, or have an issue with a product that you did receive, please contact us, and we will help you resolve your issue. Please do not file chargebacks for issues that we can resolve together.
If you have questions, please send an email to firstname.lastname@example.org or call us at (678) 403-6021
Home Power Direct FAQ
How will I know my order is confirmed?
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase.
When will my card be charged?
As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment.
When will my order be shipped?
As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail.
If your order is in stock and we process the charges to your credit card, it will ship within 2-5 business days from the date of your order. We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at email@example.com.
No Shipping outside the lower 48 in the USA.
If you have any questions regarding the above information, please send an email to firstname.lastname@example.org or call us at (678) 403-6021