FREE Shipping unless otherwise stated.
No Tax except in Georgia
Altimate Medical is one of the most preferred manufacturers making the rehabilitation products with EasyStand brand catering to the people with disabilities. With their latest technology, EasyStand has contributed to make the life of adults and children with ailments easier and better. Zing is one of the product categories of EasyStand that is useful for the children facing disability in the lower limbs. Adjustable design and multi-positioning system make zing standers one of the most versatile standing equipment. With its carefully engineered design, it offers the facility to adjust the base on three different positions, ensuring maximum patient convenience.
Fits individuals up to 44″ and up to 70 lbs.
The Zing MPS is the only multi-position stander that pivots two directions, allowing the unit to go from flat-to-load supine to 20 degrees prone in one motion. There is no need to transfer the user in and out, flip pads, foot plates and trays. This ability provides a therapeutic opportunity not possible with other standing frames. It is also one of the few standers that provides the option of up to 30 degrees of independent leg abduction. The Zing MPS is also available in Size 2.
Standing frame/table system, multi-position (e.g. three-way stander), any size including pediatric, with or without wheels
The Zing MPS Size 1 is the smaller version of the Zing MPS Size 2. The Zing MPS provides a new therapeutic opportunity to stand in supine, upright and prone without having to transfer the child in and out of the stander to switch between supine or prone standing. No need to flip pads, foot plates and trays to change positions. Tool-free adjustments and/or removal of support and positioning components adds to the ease of use.
30 degrees of independent leg abduction (60 degrees bilaterally)
A simple knob allows the entire leg to abduct up to 30 degrees, no need to re-adjust the foot plates or knee pads.
Unique Lift Mechanisms
The base unit is equipped with a prone position lockout to prevent inadvertently going past vertical. A gas spring lift lockout is available to prevent any inadvertent position changes which can be useful if other children are present during standing sessions. The Dual Control enables position changes by foot pedal or hand control.
Swing-away Tray
Multi-adjustable tray can swing either direction while remaining attached to the unit or it can be removed completely. This tray, when swung away but attached on one side of the stander, is close and well within reach once a transfer has been completed. The transfer height of the Zing MPS Size 1 is a comfortable 31″ from the floor surface.
Remarkably Modular
With 75 support and positioning components/accessories, it can be configured as a simple stander or fit a child with more complex needs. The support and positioning components available (independent and multi-adjustable foot plates, knee pads, calf pads and floating hip guides) make the Zing MPS one of the few multi-position standers that can accommodate contractures on one or both sides.
The moderate support package includes: (no substitutions)
Mast with Leg Abduction, Multi-Adjustable Foot Plates, Secure Foot Straps, Multi-Adjustable
Knee Pads, Multi-Adjustable Calf Pads, Planar Pelvic Pad, Hip Supports, Padded Positioning Strap, Hygienic Covers for (Planar Pelvic Pad, Planar Upper Body Pad, Lateral Supports, Head Support), Planar Upper Body Pad, Lateral Supports, Chest Vest, Head Support, Black Molded Swing Away Tray, Forearm Wings, Push Handle, Swivel Locking Casters, Foot Operated Gas Spring, Mast Receiver with Prone Position Lockout.
Foot Plates
Foot Straps
Knee Pads
Calf Pads
Pelvic Support
Upper Body Support
Lateral Supports
Chest Vest
Head Support
Technical Specifications
| Basic Unit | Imperial | Metric |
| Height Range | 20”- 44” | 51 cm- 112 cm |
| Weight Limit | 70 lbs. | 32 kg |
| Transfer Height( Horizontal Position ) | 32” | 81 cm |
| Center of Pelvic Support to Footplate Range, may invert footplates as necessary | 7″ – 22” | 18 cm- 56 cm |
| Upper Body Support Height Range | 4” | 10 cm |
| Kneepad Depth Range | 5” | 13 cm |
| Kneepad Inside Width | 2.5”, 3.25”, 4.25″, 5″ | 6cm, 8cm, 11cm, 13cm |
| Kneepad Dimensions | ||
| 2.5 | 3.5”x4” | 9 x 10 cm |
| 3.25 | 4”x4” | 10 x 10 cm |
| 4.25 | 4.5”x5” | 11 x 13 cm |
| 5.00 | 5”x6” | 13 x 15 cm |
| Multi-Adjustable Knee pads Width Range, Center-to-center | ||
| 2.5 | 4”- 9” | 10 – 23 cm |
| 3.25 | 4.5”- 9” | 11 – 23 cm |
| 4.25 | 5” – 8” | 13 – 20 cm |
| 5.00 | 6” – 7” | 15 – 18 cm |
| Multi-Adjustable Knee pads Height Range | +/- 0.75” | 2 cm |
| Weight of basic unit | 55 lbs. | 25 kg |
| Frame footprint, Caster-to-caster | 20” x 28” | 51 x 71cm |
| Maximum Dimensions | 21.5 x 29.5 | 55 x 75cm |
| Upholstery | Black nylon/Neoprene or Molded Urethane | |
| Hygienic Covers | Polyurethane Laminate ECO-PUL | |
| Frame color | Green, Purple, Orange, or White | |
| Casters and Wheels | 3’’ diameter | 8cm diameter |
| Lifting mechanisms Available | Gas Spring | |
| Lift Options | Dual Control (hand lever) Lockout Knob | |
| Options and Accessories | ||
| Supine positioning/ Prone-Forward positioning. Supine, MPS, TT | Supine 0-90 degrees/ Prone 0-20 degrees | |
| Positioning, Prone Model | 90 (vertical) to 0 (horizontal) | |
| Positioning, Vertical Model | 90 (vertical) only. Fixed position. | |
| Leg Abduction | 30 degrees per side | |
| Foot straps extra small – length over arch | 8” | 20 cm |
| 10” | 25 cm | |
| Secure Foot straps – length over arch | Available in same lengths as regular foot straps | |
| Footplate Options LxW | 6.00” L x 3.00” W | 15 cm L x 8 cm W |
| 7.75” L x 3.25” W | 20 cm L x 9 cm W | |
| 9.75” L x 4” W | 25 cm L x 11 cm W | |
| Footplate, platform style | 8”L x 12.00” W | 20 cm L x 30 cm W |
| Multi-Adjustable footplates – Plantar/Dorsi | +/- 20 degrees | +/- 20 degrees |
| Multi-Adjustable footplates – Fore/Aft | +/- 0.75” | +/- 2 cm |
| Multi-Adjustable footplates rotation | 30 degrees left/right | 30 degrees left/right |
| Single Calf Pad/Leg Rest | 4” x 13.5” | 10 x 34 cm |
| Single Calf Pad Strap, Fits circumference | 24” | 61 cm |
| Calf (Behind knee) Pad Option,Extra Small Pad Size, Small Pad Size, Fore/Aft Adjustment from seat plane | 3.5 x 3.5 inches, 4.5 x 4.5 inches, -1 to +4 inches | 9 x 9 cm 11.5 x 11.5 cm -2.5 to +10 cm |
| Independent Planar Leg (Calf) Support Tilt Table (TT) Pads – 3 sizes | 4” x 6”, 6” x 6”, 8” x 6” | 10 x 15 cm 15 x 15 cm 20 x 15 cm |
| Independent Planar Leg (Calf) Support Tilt Table (TT) Pad Strap – Fits circumference: | Up to 15” | 38 cm |
| Table Mount and Tray Options/Specs | Posterior Support Models (Supine, MPS, TT) | |
| Shadow Tray size – Molded/Acrylic | 11”x19” | 28 cm x 48 cm |
| Shadow Tray height range | 3” | 8 cm |
| Shadow Tray Fore/Aft range (from posterior pad to chest pad) | 0” – 10” | 0–25 cm |
| Swing-Away Tray size – Molded/Acrylic | 11”x19” | 28 cm x 48 cm |
| Swing Away Tray Height Range | 3” | 8 cm |
| Swing-Away Tray Fore/Aft Range (from posterior pad to chest pad) | 4”- 9” | 10 to 23 cm |
| Swing-Away Tray Angle Adjust Range | +40 degree inclines to -90 degrees (parallel to user when standing or in supine mode) | |
| Upholstery/Positioning Options/Specs | ||
| Hip support pad size | 3.5”H x 3.5”W | 9cm x 9cm |
| Hip supports width range | 6” – 10” | 15-25 cm |
| Lateral support pad size | 3.5”H x 3.5”W | 9cm x 9cm |
| Lateral supports width range – 2 sizes | 4” to 8” 7” – 11” |
10 to 20 18-28 cm |
| Lateral supports height range | 3.5” | 9 cm |
| Lateral supports Fore/Aft Range | 1” | 3 cm |
| Pelvic Support Planar (2 sizes) All Configurations | 5×7” 5×9” | 13cm x 18cm 13cm x 23cm |
| Pelvic Support, Form-to-Fit (2 sizes) Posterior support (Supine, MPS, TT) | 5″x7”, 5″x9” | 13cm x 18cm 13cm x 23cm |
| Pelvic Support Form-to-Fit (2 sizes) Anterior Support (Prone and Vertical) | 5″x10”, 5″x12” | 13cm x 25cm 13cm x 30cm |
| Upper Body Support Planar | 5″x5” (Anterior only), 5”x7”, 5”x9”, 7″x7”, 7″x9” | 13cm x 13cm 13cm x 18cm 13cm x 23cm 18 x 18 cm 18 x 23 cm |
| Upper Body Support Form-to-Fit | 5”H x 10”W, 5”H x 12”W, 7”H x 10”W, 7”H x 12”W | 13cm x 25cm 13cm x 30cm 18cm x 25cm 18cm x 30cm |
| Upper Body/Pelvic Tilt Table (TT) Pads – 3 sizes | 14”L x 14”W 16”L x 14”W 18”L x 14”W | 36 x 36 cm 41 x 36 cm 46 x 36 cm |
| Chest Pad | 3”Hx8”W | 8cm x 20cm |
| Chest Strap (pad size) | 5″Hx8”W | 13 x 20 cm |
| Chest Strap (approximate user circumference) | Up to approx. 24” | Up to approx. 61 cm |
| Chest vest – X-Style | 9.5”Lx9”W | 24 x 23 cm |
| Chest vest – X-Style | 11”Lx9.5”W | 28 x 24 cm |
| Posterior Head Supports (Supine, MPS, TT) | ||
| Head support height range. (From top of upper body pad) | 8” | 20 cm |
| Head support depth range – from backrest | -2.5” to +1.5” | -6 to +4 cm |
| Head Support Size Extra-Small | 5” H x 8” W Cushion | 13 cm H x 20 cm W |
| Head Support Size Small | 6” H x 10” W Cushion | 15 cm H x 25 cm W |
| Flat Headrest | 5” H x 7” W | 13cm x 18cm |
| Form-to-Fit Head Support – Height, Width, variable up to approximately: | 5”, 10” | 13 cm 25 cm |
| TT Planar Head Support | 8” H x 8.5” W | 20 cm H x 22 cm W |
| Anterior Head Supports (Prone, Vertical) | ||
| Face Aperture | 2 – 3 x 9” Pads | 8cm x 23cm |
| Positioning belt – hip circumference | Up to approx.. 24” | Up to approx.. 61 cm |
| Configurations Available: | ||
| Supine | Posterior Support Pads | |
| MPS (Multi-positional Stander, w/Prone Forward) | ||
| TT (Tilt Table, larger upholstery surfaces) | ||
| Prone | Anterior Support Pads | |
| Vertical (fixed position, no lift options available) |
Zing Catalog
Zing Mini-Catalog
Manual
Cancellations & Refunds: Home Power Direct has one of the best return policies in the industry. Cancel any time before your order has shipped, completely free of charge (exceptions apply, including custom made orders).
Call 1-678-909-1527 or email sales@homepowerdirect.com
Frequently Asked Questions
How will I know my order is confirmed?
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase.
When will my card be charged?
As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment.
When will I know my order has shipped?
As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment. If, for some reason, there is a delay in stock, we will contact you before accepting payment.
When will my order ship?
If your order is in stock and we process the charges to your credit card, it will ship within 2-5 business days from the date of your order. We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at sales@homepowerdirect.com.
No Shipping outside the lower 48 in USA.
If you have questions regarding anything below, please send an email to sales@homepowerdirect.com or call us at 1-678-909-1527
Cancellations & Refunds: Cancel your order any time before it ships completely free of charge (exceptions apply such as custom orders, see below).
If you have questions, please send an email to sales@homepowerdirect.com or call us at 1-678-909-1527
IMPORTANT INFORMATION:
Cancellations (Before Order Ships)
If you need to cancel an order, please contact us as soon as possible so we can refund you in full before your order leaves the warehouse. Reach agents during business hours at 1-678-909-1527, or email sales@homepowerdirect.com any time.
Cancellations of Custom Orders
In the event, you have made a custom or made to order products cannot be canceled or refunded as these products are put into production specifically for your order.
These units, are custom made to your specification or created once you order. Once you place your order they start building your unit. Your warranty will guarantee you a fully functional and operational product. If it is not clear whether your order is custom or made to order, please message or call us.
All sales are final for Custom made and Made-to-order products.
Refunds and Returns
If you need to exchange your product, you may do so. You, as the customer, are responsible for any shipping costs throughout any returns and exchange processes.
Not all orders are available for return once they have shipped. We order our products directly from the manufacturer. Therefore, if the manufacturer will not permit us to return a product, we cannot offer you a return. This often varies on a case-by-case basis; please reach out to us if you would like specific information on your brand and/or product.
Due to drastically increasing LTL/freight shipping costs, any outright returns will incur 25% cancellation fee + return shipping costs. If you are replacing the product with something else, we may be able to help you cover some of the costs depending on the product.
Shipping Times
We promise to do our best to get your order to you as soon as possible. We provide estimated shipping times on the product pages based upon what our suppliers and freight companies tell us, and those estimated shipping times may change or vary without notice (Due to supply chain issues, the steel mills behind on making metal, the manufacturers delayed because of the mills, the overwhelmingly demand on shipping, factory/warehouse and dock workers and so on).
Order delays have proven to be unavoidable and outside of Home Power Direct's control. While this might be frustrating, we ask you to please be patient and understanding with us in these tough times. We thank you for your business and appreciate your patience.
Warranty
Warranties vary depending upon the manufacturer - see individual product pages for details. Warranty damages occur over time and from use. If an item was damaged upon arrival, and not reported within 30 days, that is not a warranty claim.
Chargebacks
Our team of agents are here to assist you and resolve any issues. We have purposefully made our policies as fair as possible, and we believe they are the top in the industry. We are on your team. We are immediately responsive, and will do all that we can to help you out and provide the best resolution.
If you have not received a product, or have an issue with a product that you did receive,please contact us, and we will help you resolve your issue. Please do not file chargebacks for issues that we can resolve together. Thank you for shopping with us!
If you have questions, please send an email to sales@homepowerdirect.com or call us at 1-678-909-1527
BY USING THE SITE, YOU AGREE TO THESE TERMS OF USE; IF YOU DO NOT AGREE, DO NOT USE THE SITE.
